Socket-7 Base Full Function POS Board POS-566 With LCD/CRT VGA, 10/100Mbps Ethernet, DI/O & Audio PS/2 KBD/Mouse Flash Disk SPECIFICATIONS USB 16-bit Sound ¤ ¤ ■ CPU : Socket-7 base support Intel Pentium MMX, AMD 10/100 Base-T  K6/K6-2/K6-3, IDT WinChip .... up to 100MHz FSB Ethernet ■ BIOS: Award PnP BIOS COM ports ■ External Cache Memory : 512KB ■ System Chipset : ALi Aladdin 5 ■ System Memory : Three 168-pin DIMM sockets up to 768MB SDRAM Parallel Port ■ Display : — Chip : CHIPS 65555 LCD/CRT VGA XGA (36-bit) LCD Controller — Bus : PCI (C&T 65555) 2MB 3 x DIMM — V-RAM : 2MB EDO RAM — Resolution : 1280 x 1024 (256 colors) for CRT display Isolated 4DI/4DO (768MB Max.) — Connectors : DB-15 for CRT display  1 x 50-pin by pin-header for 36-bit LCD panel Dimensions:  1 x 44-pin by pin-header for 24-bit LCD panel (With FP24-01A board) 2 — Optional one or two channels LVDS module “ — Supports 3.3V or 5V LCD panel ■ Ethernet : Realtek RTL8139C/8100BL 10/100Mbps Ethernet controller “ ■ SSD : One DiskOnChip socket ■ Audio : CreativeLab SB16 compatible audio chip on board ■ I/O : — 3 x RS-232 ports  — 1 x RS-232/422/485 selectable port  — 2 x parallels port (support SPP/EPP/ECP mode)  — 2 x USB 1.0  — 1 x IrDA port  — 1 x FDD port  — 2 x ATA-33 IDE channel (40-pin/44-pin header)  — 1 x PS/2 for Keyboard/Mouse ■ Isolated Digital I/O : — Digital Input : 4 channels  — Digital output : 4 channels  — Isolated channel with common power “ ■ Extension Slot : One PCISA bus for add-on card ORDERING INFORMATION ■ WDT: Software programmable, support 1~ 255 sec. system reset 2 “ ■ E Key : A non-volatile 1Kbit EEPROM is provided to retain ■ POS-566 Socket-7 base full function POS board with  application critical read/write data  FP24-01A board ■ Power Connector : AT and ATX ■ LVDS-01-R7One channel LVDS module ■ Power Consumption : +5V@5.5A, +12V@170mA, -12V@60mA ■ LVDS-02 Two channels LVDS module  (AMD K6-2 350MHz CPU and 384MB SDRAM) ■ Operating Temperature : 0~60¡C (CPU cooler required) ■ Relative Humidity : 5~95%, non-condensing ■ GW: 900g Dual Socket-370 Processor ATX Main Board PS/2 Keyboard/Mouse SPECIFICATIONS “ ■CPU: Dual Socket-370 Processor support Celeron (P-PGA)/ IDE RAID ¤  Pentium III (FC-PGA) up to 133MHz FSB ■BIOS: Award PnP BIOS PCIR-01 ■System Chipset : VIA VT82C694X/VT82C686B One Slot ■System Memory : Four 168-pin DIMM sockets up to 2GB SDRAM PCI RISER ■Display: SIS 6326 with 4MB V-RAM Card ■Ethernet: Dual Intel 82559 10/100Mbps LAN Chip and  NS DP83820(83821)/83861 1000BASE-T Gigabit Ethernet (optional) CF Type II Socket ■SSD: CompactFlash Type II Socket for Compact Flash or USB ports  IBM MicroDrive HDD. 1000 BASE-T ■Audio: AC’97 compliant Audio CODEC Gigabit Ethernet ■I/O:— 2 x RS-232 serial port (16C550 UARTs compatible)  — 1 x parallel port (SPP/EPP/ECP) ¤ Dual Intel 82559  — 2 x USB 1.1 (Pin-header) 10/100Mbps Ethernet  — 1 x IrDA (SIR) Dimensions  — 1 x FDD port, support 1.44MB, 2.88MB, 3-mode function  — 2 x ATA-100 IDE channels ■IDE RAID : Extra dual ATA-100 ports with RAID-0,1, 0/1 function  IDE RAID controller— PROMISE PDC-20267 ■One PCI Slot ■WDT: Software programmable, support 1~ 255 sec. system reset ■Support ATX power control function ■Power Consumption: +5V@10.5A,+12V@350mA, 3.3V@5.5A  (Dual PIII 1GHz and 2GB SDRAM) ■Operating Temperature: 0~60¡C (CPU cooler required) ■Relative Humidity: 5~95%, non-condensing ■GW: 900g ORDERING INFORMATION ■MB-3792GDual Socket-370 Processor ATX Main Board with  1000BASE-T Gigabit Ethernet ■MB-3792 Dual Socket-370 Processor ATX Main Board ■PCIR-01 One slot PCI Riser Card ■PCIR-03 Three slots PCI Riser Card 3-48 100MHz FSB